![]() You need the section titled "Manual method". Press 'Load Firmware Online', lower right part of the screen. ![]() Select Target and Version in the upper left corner. Download and install the LibrePilot GCS that works on your version of PC, then go here to install the firmware onto the CC3D. How to install Betaflight firmware on your FC: Using Betaflight Configurator, select the Firmware Flasher tab and select what firmware to flash in one of two different ways, online or local firmware. ![]() If you don't have a way to flash the bootloader with your current setup then go here for instructions to flash the hex bootloader you got from the previous link:Īfter that you have a bootloader flashed. If the setup you have running can flash hex files then go here to get a hex bootloader to install with your current setup: Check the I know what I’m doing box and then Flash button. Now you can open the downloaded cleanflightCC3D.bin. Open the OpenPilot GCS software, connect the CC3D board through the USB-Port, go to the Firmware-Tab and click the Halt button. If that doesn't work then here are other ways. Download the cleanflightCC3D.bin from GitHub. You can either search for that section or refresh the page (click in web address and press enter works best) if it doesn't take you to the correct section: You need the section titled "Bootloader + firmware update example". Go here and try this first because it is easier. Also question are there other people having problems running newer versions of Cleanflight or Inav like Ver 1.7 or 2. It is possible that you have a (possibly old) bootloader already installed. You need bootloader first, then firmware. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |